LENCO DVP-1045 Mode D'emploi page 9

7. AUDIO
DVD:Press AUDIO repeatedly during playback to hear a different audio language or audio track, if available.
CD/VCD:Press AUDIO repeatedly during playback to hear a different audio channel (Left,Right,Mix,Stereo).
8. PLAY/PAUSE
Press PLAY/PAUSE once to pause playback, pressing PLAY/PAUSE second time will resume the playback.
9. STOP
When this button is pressed once, the unit records the stopped point,from where playback will resume if
PLAY( )ispressed after wards. But if STOP button is pressed again instead of PLAY( ) button, there will be no
resume function.
10. MODE
Set LCD parameter(adjust brightness, contrast,and saturation).
11. VOL+
Adjust volume
12. Forward Skip
Go to next chapter/track.
13. Reverse Skip
Go to previous chapter/track to the beginning.
14. BUTTON
Press BUTTON allow skipping ahead at 5‐level speed(X2‐>X4‐>X8‐>X16‐>X32‐>PLAY), press PLAY button
return tonormal playback.
15. BUTTON
Press BUTTON allow skipping back at 5‐level speed(X2‐>X4‐>X8‐>X16‐>X32 PLAY), press PLAY button return
tonormal playback.
16. STEP
Step the motion in DVD mode.
17. SEARCH
Goto time point, title or chapter you want in DVD Mode.
18. SUBTITLE
Press SUBTITLE repeatedly during playback to view a different subtitle languages.
19. ANGLE
DVD:Press ANGLE will change the view angle, on DVDs that support this feature.
20. TITLE
Return to DVD title menu.
21. ENTER
Confirms menu selection.
22. SETUP
Accesses or removes setup menu.
23. VOL‐
24. REPEAT
Press REPEAT during playback to select a desired repeat mode.
DVD: you can play select repeat chapter/title/off.
CD/VCD: you can select repeat single/all/off.
9