LENCO DVP-1045 Mode D'emploi page 5

Mounting the DVD in a Car
Use the supplied mounting kit to install the DVD players on the back of the
vehicle's headrests.
1. Align the angled support's bolt to the screwhole on the back of the DVD unit.
Turn the boltclockwise and secure the support.
2. Lift the headrest off its leg supports. Align thehorizontal support with the
headrest leg slots andensure the horizontal support rests securely on thetop
of the car seat. Reattach the headrest.
Remark: If the legs of the headrest are too thick for the opening of the
horizontal support bar of the bracket, please unscrew the 4 screws of
the support bar of the bracket to adjust the opening. In case the screws
are too short, use the longer screws (provided in the giftbox).
3. Grip the DVD firmly with both hands and slot theangled support firmly
into the support bar. It willclick. Ensure the entire unit is secure.
5
Support
Headrest
Leg
support
Horizontal
support bar