Table des Matières
Publicité
Mounting the Worktop
Parts
7
8
Place worktop over cabinets and lower onto cabinets.
Needed.
4- #8 x25mm
screws
Drill 3/32" pilot holes on interior
9
roof of cabinet.
10
Tighten screws to secure cabinets.
3
3
Inserting Cabinets Shelves on an angle
Open cabinet doors. Attach
11
shelf clips to desired height.
Insert rack at a slight angle and position
13
4
over shelf supports.
Ensure shelf supports sits in groove
15
on lower edge of rack.
The shelf supports are inserted into
12
front and middle hole positions.
Lower shelf down
14
onto shelf supports.
16
Insert remaining shelves.
Publicité
Table des Matières
