Table des Matières
Publicité
Fastening Cabinets
9
10
Parts Needed.
Drill 3/32" pilot holes on interior wall of cabinet being fastened.
4 - #8 x 25mm
screws
Using pilot hole as guides, screw into second cabinet.
11
Do not over-tighten screws and punch through other side!
Note:
All drawers must be removed prior
to fastening cabinets together.
X4
Mounting the Worktop
Parts
13
12
Place worktop over cabinets and lower onto cabinets.
Needed.
4 - #8 x 25mm
screws
Drill 3/32" pilot holes on
14
interior roof of cabinet.
X4
15
Tighten screws to secure cabinets.
3
Publicité
Table des Matières
