Table des Matières
Publicité
Installing LED Lights for Wall Cabinets
For the wall cabinets, drill 2 holes through top using size 3/8"
1
drill bit, using measurements below.
Method 1. Using double sided tape
2
provided. Attach double sided tape to
back of LED light bar. Peel backing off.
Feed connector cable through pre-drilled holes on tops
4
of cabinet and connect at ends of LED light strips.
3
Top View
.75"
.75"
2.5"
2.5"
Front of Cabinet
3
Center and press firmly 5.5", in from
walls and 7.5", in from back wall.
5.5"
7.5"
Installing LED Lights for Wall Cabinets cont.
Method 2. Using clips provided.
Predrill 3/32 holes, 8.5" in from side walls
5
and 8" in from back wall. Attach clips
using screws included in packaging.
8.5"
8"
8.5"
Installing LED Lights for Display Cabinets cont.
7
For bottom Display cabinet drill holes on back panel following Diagram 1. The
hole can be placed on either side of cabinet at point A. or B., depending on outlet
3
location. Using installation method from Steps 2 or 5 above center and install LED
light 3 - 4 inches in from front.
Clip LED light strip into clips. Return
6
to Step 4. for connecting light
string.
Publicité
Table des Matières
