Table des Matières
Publicité
Fastening Cabinets
12
11
Drill 3/32 pilot holes on interior wall of cabinet being fastened.
Parts Needed.
4 - #8 x 25mm
screws
Using pilot hole as guides, screw into second cabinet.
13
Do not over-tighten screws and punch through other side!
Note:
All shelves and drawers must be removed
prior to fastening cabinets together.
X4
Mounting the Worktop
14
Place worktop over cabinets and lower onto cabinets.
4 - #8 x 25mm
screws
Drill 4, 3/32" pilot holes on
15
interior roof of cabinet.
16
Tighten screws to secure cabinets.
3
Publicité
Table des Matières
