NEW AGE HOME BAR Serie Mode D'emploi page 30

Adjusting The Door Hinges
Using a Philips screwdriver, the doors can be adjusted:
Left, right, forwards and backwards.
15
To adjust the doors left or right, turn the screw (A) clockwise or counterclockwise.
To adjust the gap between the doors and frame, turn the screw (B)
16
clockwise or counterclockwise.
Thank you for purchasing a NewAge Product!
Please give us a call or visit online if you have any questions.
Call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.com
A
B
Installing LED Lights
OVERVIEW
There are two LED light kits available. The LED light with adapter(A), and the
LED light with connector(B).
The adapter kit is used to connect
A
to the electrical outlet, and contains
the power on/off switch for the LED
lights. It is used when one single
light unit is needed or as the first
light used when linking multiple
light units together. It controls on/
off power for all light units linked to
it.
LED adapter cable (A) must connect to light
at end with on/off switch, for switch to be
operational. Use connector cords(B)to connect
additional lights. Up to 4 LED lights can be
connected to one Power adapter cord(A).
NOTE: LED light kits are not included in all
sets and may be sold seperately for some
sets and cabinets.
The connector kit is used when
B
additional light units(up to 4) want
to be linked together. It works in
conjunction with and is controlled
by the LED light with adapter unit.
General layout of how the LED adapter
cable is connected to outlet.