NEW AGE HOME BAR Serie Mode D'emploi page 4

Installing the Handles
1
Parts Needed.
2 x Handle
4 x Handle Bolt
M4 x 22mm
3
Screw in M4 x 22mm bolts.
Note:
Cabinets come with handles installed on
inside of drawers/doors.
Align handle to holes
2
on doors or drawers.
Mounting Cabinets
Use stud finder to locate the studs
4
and mark the wall with a pencil.
6 Near the top of the cabinet, drill 1/4" holes through the back of the cabinet that are in line with
marked studs. Repeat for drilling two holes near the bottom of the cabinet.
Pilot Holes
7 Place cabinet flush against wall and
attach using screws and washers.
Note:
Remove wine rack to make
attaching cabinets easier.
5
Gather parts.
4 x Lag Screw 4 x Threaded 4 x Threaded
6mm x 55mm Washer Caps
8
Use threaded caps to cover screws.