Initial Setup; Parts Identification - Baratza VIRTUOSO PLUS Guide De Démarrage Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
VIRTUOSO+™

INITIAL SETUP

For the full manual, visit baratza.com/documentation
1.
Hand-wash the hopper lid (1), hopper (2), black silicone
gasket (4), and ground coffee bin
water, and dry thoroughly.
ring burr (5) in water or it will rust.
The ring burr
(5)
2.
to grind setting 30.
3.
Be careful not to tear the gasket.
(4)
on top of the ring burr (5), align the gasket notches
with the ring burr tabs (one of which is red) and gently
work the gasket down until it is seated on the top 1⁄8"
(4mm) of the ring burr (5).
4.
To install the hopper, ensure the silver grind setting
indicator
(3)
is positioned to the right, and aligned with
the black triangle marker on the case. Press the hopper
down and twist clockwise to setting 20. You should
hear the hopper click as it rotates.
If Step 4 is not working well: The black grind adjustment
(12)
ring
must be rotated fully counterclockwise for the
hopper to install. You can rotate the grind adjustment
(12)
ring
by hand, using the adjustment ring tabs
leverage, if needed and then continue from step 3.

Parts Identification

Hopper Lid
1.
Bean Hopper
2.
Grind Setting indicator
3.
4.
Black Silicone Gasket*
Removable Ring Burr
5.
6.
Grind Adjustment Scale
LED Display
7.
8.
Dial
Grounds Bin with Max Fill Line
9.
WWW.BARATZA.COM
(9)
Do not wash the removable
has a red tab and it should be pointing
Place the gasket
Brush*
10.
Weighted Base
11.
Grind Adjustment Ring
12.
13.
Adjustment Ring Tab
Burr Alignment
14.
& Lifting Tabs
Center Cone Burr
15.
* included in grounds bin
in warm, soapy
(13)
for
1
2
4
5
8
4
13
5
1 0
20
15
3
6
7
9
10
11
12
14
3 0
Rev 05/29/2019 (v1)

Publicité

Table des Matières
loading

Table des Matières