ETAS ES720.1 Consignes De Sécurité page 2

ES720.1
General safety at work
The existing regulations for safety at work and accident prevention must be followed. All applicable regulations and
statutes regarding operation must be strictly followed when using this product.
Intended use
Application area of the product
This product was developed and approved for applications in the automotive sector. The module is suitable for use in
interiors, in the passenger cell or in the trunk of vehicles. For use in other application areas, please contact your ETAS
contact partner.
At ambient temperatures between 55 °C and 70 °C, the module may be used only at an operating facility with restricted
access. The following must be ensured at this operating facility:
1. Access to the operating facility:
For maintenance personnel only, and
•
For users only who have been informed about the access restriction to the operating facility and about
•
all precautionary measures to be observed
2. Securing the operating facility:
Access to the operating facility is secured by means of a tool or lock and key or some other way and is
•
monitored by the persons in charge of the operating facility.
Requirements for the technical state of the product
The product is designed in accordance with state-of-the-art technology and recognized safety rules. The product may be
operated only in a technically flawless condition and according to the intended purpose and with regard to safety and
dangers as stated in the respective product documentation. If the product is not used according to its intended purpose,
the protection of the product may be impaired.
Requirements for operation
• Use the product only according to the specifications in the corresponding User's Guide. With any deviating
operation, the product safety is longer ensured.
Observe the requirements on the ambient conditions.
•
Do not use the product in a wet or damp environment.
•
• Do not use the product in potentially explosive atmospheres.
CAUTION!
Risk of burns on hot surfaces of the module!
Avoid touching the surfaces of the module during operation at high ambient temperatures.
During its use in the vehicle and at an ambient temperature of 70 °C, the module may reach surface temperatures of up
to 90 °C.
ES720.1 in combination with ETK
WARNING!
Inadvertent reset of ECU can cause engine shutdown!
If you operate the ES720.1 in combination with an ETK, new experiments with ETK may be loaded onto the ES720.1
only with the vehicle at standstill!
It is absolutely necessary to wait before the drive until the MEAS LED at the ES720.1 module is permanently lit.
Any change of the hardware setup from ES720.1 and ETK or a software update of the ES720.1 can cause a reset of the
ECU.
WLAN functionality
The Drive Recorder variants ES720.1-8W and ES720.1-16W are approved only in the European Union (EU), the United
States, Canada and India.
The use of the WLAN functionality of the ES720.1-8W and the ES720.1-16W Drive Recorder variants is intended for
indoor only.
ES720_SAV, Version 2, 2016-10-13
F-00K-800-060
Template: 00TE00084 V11