Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALL FLUE MOUNTING
BRACKET
1. Assemble the flue mounting bracket,
adjusting outside width as shown. Fig.9
2. At the ceiling, center the mounting-
bracket directly over the range hood.
3. Secure the bracket assembly to the ceiling
using (2) 4.8x38mm mounting screws
and drywall anchors. Make sure the
bracket is pushed into the corner, tight
against the wall and centered over the
hood. Fig. 10.
FLUE MOUNTING
BRACKET
MOUNTING SCREWS
- 11 -
3.9 x 6 mm
FLAT HEAD
BRACKET SCREWS
12-3/8"
DRYWALL ANCHORS
4.8x38mm
FIG. 9
FIG.10
Publicité
Table des Matières
