Before using your appliance
for the first time
Remove leaflets, adhesive tape and
1.
protective film.
Clean the appliance.
2.
~ "Cleaning" on page 48
Electrical connection
Caution!
Do not connect the appliance to
electronic energy saver plugs.
Note:
You can connect the appliance
to mains-controlled and sine-controlled
inverters.
Mains-controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications. Isolated
applications, e.g. on ships or in
mountain lodges, which are not
connected directly to the national grid.
After installing the appliance, wait at
1.
least 1 hour before connecting it to
prevent damaging the compressor.
2.
Connect the appliance via a
correctly installed socket.
The socket must comply with the
following data:
Socket with
Conductor
Fuse
Outside Europe: Check whether the
indicated current type of the
appliance corresponds with the
values of your power supply.
Appliance specifications are on the
rating plate.
~ "Getting to know your appliance"
on page 35
3.
Connect the appliance to a socket
near the appliance.
The socket must be freely
accessible even after the appliance
has been installed.
220 V ... 240 V
50 Hz
10 A ... 16 A
Getting to know your appliance en
*
Getting to know your
appliance
Fold out the last page with the
y o u r a p p l i a n c e
G e t t i n g t o k n o w
diagrams. The appliance and diagrams
may differ according to features.
Appliance
~ Fig. !
* Not all models.
Refrigerator compartment
#
Freezer compartment
+
(-h Controls
Main switch on/off
)"
Lighting
)*
Shelf
)2
Camera
):
Ventilation opening
)B
(refrigerator compartment)
Chill comp.
)J
Vegetable container with
)R
humidity control
Rating plate
)Z
Frozen food container
)b
Freezer calendar
)j
Height-adjustable feet
1"
Butter and cheese
1**
compartment
Tray for large bottles
12
35