Uline METRO Serie Instructions De Montage page 4

NOTE: Determine whether L-desk will be set
up for right-hand or left-hand configuration.
This will impact how the return is assembled.
Assembly of a right-hand L-desk is shown in
the following figures. For left-hand L-desk
configuration, the opposite sides will be
connected.
1. Align holes on right side of the return modesty panel
with the holes in the left side of the return leg frame.
Insert three M6 x 45 mm bolts (E) and tighten.
(See Figure 7)
E
2. Align the holes on the three Z connectors (H) with the
left side of the return modesty panel. Insert three
M6 x 15 mm bolts (F) and tighten. (See Figure 8)
NOTE: There will be unused holes in the corners
of the return modesty panel. These can be
disregarded as they are designed for other
product configurations.
PAGE 4 OF 18
L-DESK RETURN ASSEMBLY
Figure 7
Figure 8
F
H
3. With second person, carefully move the return frame
to the right side of the desk frame. Align the holes
on the Z connectors (H) with the front of the right leg
frame. Insert three M6 x 15 mm bolts (F) and tighten.
(See Figure 9)
4. Align three modesty panel connectors (B) with holes
on top of modesty panels. Attach using three
M6 x 15 mm bolts (F) and tighten. (See Figure 10)
B
Figure 9
H
F
Figure 10
F
1022 IH-9778