Uline METRO Serie Instructions De Montage page 3

5. With second person, carefully lift the desktop over
the assembled frame and align the holes in the
frame with the holes in the leg frame connectors
(A). Insert four M6 x 55 mm bolts (D) through the leg
frames into the leg frame connectors and tighten.
Insert two M6 x 15 mm bolts (F) through the modesty
panel connectors (B) into the rear of the desktop
and tighten. (See Figure 5)
NOTE: For 48 x 24" desk, only one
M6 x 15 mm bolt will be inserted.
Figure 5
A
Leg Frame Connector x 2
F
M6 x 15 mm Bolt x 32
PAGE 3 OF 18
DESK ASSEMBLY CONTINUED
B
F
A
D
L-DESK RETURN HARDWARE
B
Modesty Panel Connector x 1
G
Grommet Cap x 1
6. Insert two grommet caps (G) into the desktop.
Insert six leg caps (J) into the leg frames.
(See Figure 6)
Office desk is now completely assembled.
C
Adjustable Glide x 2
H
Z Connector x 3
K
Hole Cap x 2
G
J
Completed Assembly
D
M6 x 55 mm Bolt x 2
I
Flat Bracket x 2
Figure 6
E
M6 x 45 mm Bolt x 3
J
Leg Cap x 3
1022 IH-9778