Replacing Light Bulbs - Zephyr Essentials Pisa ZPI-E24AG Guide D'utilisation, D'entretien Et D'installation

REPLACING LIGHT BULBS

CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter-clockwise. Note: Bulb does not unscrew; it turns 60 degrees,
stops and falls out.
the bulb or use a rubber/latex glove to grip the bulb and turn counter clockwise.
For Zephyr part numbers please turn to page 20 of the manual.
17