Surface Maintenance - Zephyr Essentials Pisa ZPI-E24AG Guide D'utilisation, D'entretien Et D'installation

SURFACE MAINTENANCE:

Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster
stainless steel grain.
Decorative Mesh Filters
be replaced on a regular basis but is required to be kept clean.
Filter should be cleaned after every 30 hours of use or once a month.
Remove and clean by hand or in dishwasher
on low heat. Spray degreasing detergent and
leave to soak if heavily soiled.
Replacing Mesh Filter
prolonged use, replace with the following part
number:
Hood Model: Part No.
ZPI 50200054
or broken mesh or damaged frame.
Qty. to Order.
1
16
www.zephyronline.com
1
2