Replacing Light Bulbs - Zephyr Essentials Vortex AK9028AS Guide D'utilisation, D'entretien Et D'installation

REPLACING LIGHT BULBS

CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
MODELS: AK9028AS, AK9028AS290, AK9034AS, AK9034AS290
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and
falls out.
latex glove and turn counter clockwise.
MODELS: AK9028AS-ES, AK9034AS-ES
Make sure all power is turned off and bulbs are not hot.
Access light bulb by removing light bulb lens cover by 1 screw.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and falls out.
Replacement bulbs are available from Zephyr or specialty lighting stores.
Purchase type: 13w Fluorescent GU-24 CFL, STS T3 13GUS
15