Connecting To The Computer - Polycom SoundStation2 Instructions

Connecting to the Computer

Desktop
computer
or laptop
Desktop
computer
or laptop
sound card
To connect the SoundStation2
™
Station2W to your desktop computer
or laptop, please connect the Computer
Calling cable to your sound card in the
following manner:
1. The single BLACK connector on the
Computer Calling cable is plugged
into the 2.5 mm input/output jack
on the side of the SoundStation2
™
2W . (See above.)
For use with SoundStation2™
Once the SoundStation2
your desktop computer or laptop, the LCD
should have a main message that reads
"MOBILE". (See below.) It is now ready
to be used to make calls over the Internet.
™
or Sound-
™
is connected to
MOBILE
INFO EXIT
GREEN connecter
(LINE OUT)
RED connecter
(MIC or LINE IN)
2. The GREEN connector on the
Computer Calling cable plugs into
the LINE OUT jack on your desktop
computer or laptop.
3. The RED connector on the Comput -
er Calling cable plugs into the MIC
IN jack on your desktop computer
or laptop. If the sound card does not
™
or have a Mic input, use the LINE IN
input instead.
Please Note:
• Voice quality may vary depending on
the network connection, application
type and computer model.
• The application interface on your desk-
top computer or laptop is used for all
dialing and call management functions
when using the Computer Calling Kit.
SoundStation unit
TM
Input/ouput jack
BLACK
connecter
Y Cable