NEC Flat Professional Serie Mode D'emploi page 12

Controls cont.
Information
Display Mode: Indicates the current mode and frequency setting of the monitor.
Fitness Tips: The Fitness Tips provide you with helpful reminders to periodically
rest your eyes. You may select how frequently the reminders are displayed based
upon your individual needs. Select an interval from 15, 30, 45, 60, 90 or 120
minutes for the tips to appear. When the tips appear, follow the advice of the tips
and press EXIT to clear.
Refresh Notifier: A message will advise you if the refresh rate of the signal being
applied to the monitor by the computer is too low. For further information, please
refer to your display card or system manual.
Monitor Info: Indicates the model and serial numbers of your monitor.
TM
OSM Warning
NO SIGNAL: This function gives a warning when there is no signal
present. After power is turned on or when there is a change of input
signal or video is inactive, the No Signal window will appear. The
PROCEED button opens the DVI SELECTION CONTROL, as indicated in
the section for DVI selection.
NOTE: If " CHANGE DVI SELECTION" is displayed,switch to DVI
SELECTION.
7A811011.WPC
10
12 5/18/00, 12:26 PM