AL-KO Silver 470 E Premium Mode D'emploi page 17

Assem bly
Follow the enclosed assembly instructions.
/ \ Caution!
The machine must not be operated before as-
sembly work has been completed!
Operation
K * 1 The camera symbol refers to illustrations on
pages 4/5.
Adjusting the cutting height
/ \ D anger - risk of injury!
Only adjust the cutting height with the motor
switched off and the blade stationary!
E B ■ Always set all the wheels to the same cutting
height.
■ Cutting height adjustment depends on the
particular model.
A xle adjustm ent
1. Disengage the lever by pushing it to the side and
holding it there (C l 1a).
■ For shorter grass, push the lever towards the
front wheel.
■ For longer grass, push the lever towards the
rear wheel.
2. Release the knob at the desired cutting height.
Q uick a d ju s tm e n t o f individual wheels
or axle ad ju stm en t
1. Disengage the lever by pushing it to the side and
holding it there ( a 1b, 1c).
■ For shorter grass, push the lever towards the
front wheel.
■ For longer grass, push the lever towards the
rear wheel.
2. Release the knob at the desired cutting height.
470 621_b
Q uick ad ju stm en t o f individual w heels o r axle
ad ju stm en t ( O 1d)
1. To release the lever, press to the side and hold.
2. Push the lever to the left or right to select the
desired cutting height.
3. Let the lever click into position.
4. Check that all wheels are set to the sam e position.
Adjusting the working height (option)
Button adjustm ent
1. Hold down both buttons on the upper bar and select
the desired position (C l 5).
2. R elease the buttons, allowing the upper bar to click
into place.
C lam p adjustm ent
1. Hold firmly onto the upper bar and release both
clamps (C l 5).
2. M ove the upper bar to the desired position and
close the clamps.
Attaching the grass collection box
/ ? \ D anger - risk o f injury!
Only remove or attach the grass collection box
with the motor switched off and the blade station-
ary.
1. Lift the baffle and insert the grass collection box
into the holder.
Level indicator (option)
During mowing, the level indicator is pushed upwards by
the airflow ( O 2a). If the grass collection box is full, the
level indicator touches the box (C l 2b). The grass collec-
tion box must be emptied.
G B
17