Step 2
C / C1
2.1. Insert twelve Hooks (R) into the Rail (C) and twelve Hooks (R) into the Rail (C1) by sliding them
into the appropriate location designed for the hooks.
2.2. Insert seven hooks (R) into the Rail (D) and seven hooks (R) into the Rail (D1) by sliding them into
the appropriate location designed for the hooks.
NOTE:
Make sure the direction of the Hooks is the same as per the above drawing.
The Shelter has two Rails: one for the Screen and one for the Curtains. The Curtains and the
Hooks for the Curtains are sold separately (while supplies last). The Hooks for the Curtains
must be placed on the internal Rail. The same number of Hooks must be used for the Curtains
and Screen.
R×12
D / D1
R×7
R×7
C / C1
D / D1
Page
8