Uberhaus 72255106 Guide De L'utilisateur page 20

Step 14
J1
K1
J
K1
J2
K1
K1
×3
K1
K1 K1
J2
J2
J
J1
14.From the front of the Shelter, slide three Main Roof Panels (K1) in the grooves of the Roof Holder
Bars all the way to the end (1 per row).
CAUTION:
One side of each Roof Panel is treated to provide UV protection. Make sure that the side with
UV protection is facing outward. This step is very important – if the roof is not assembled as
per the instructions shown, it will not be covered by the warranty.
NOTE:
1. Pay attention to the installation instructions.
2. The panels are covered with a plastic film to identify which side is treated with UV protection.
Once this film is removed, it is not possible to tell which side protects against UV rays.
Therefore, it is recommended to remove the film only once the panels have been installed, one
at a time.
Page
20