SKYLOTEC MOBILFIX AP-018 Instructions De Montage Et D'emploi page 32

Enter building sketch on page 2 and checklist on page 2
Roof plan (please draw lines with a ruler):
(If there is insufficient space, please use separate sheets and attach them to the protocols!)
Checklist:
Substrate as expected (no doubts concerning load-bearing capacity)


instructions of the
manufacturer
 
Connection technology assembled as specified by the respective
manufacturer



 
Identification sign/s is/are present and affixed


moves easily
rail/cable system
Trial walkthrough was executed and passed
(Only for rail/cable system)


and
have been transferred to the owner
 
Additional information
 
Remarks by chief assembler:
Handed out to:
(Owner or owner's representative)
Construction site manager installation company
MAT-MA-0007 MOBILFIX

Verification
 
installation executed in accordance with the installation

Only corrosion-protected
 



Pre-tension
 
System/attachment point is free of contamination and runner
 
 

System is assembled free of defects and has been transferred
 
installation instructions, use instructions are present, complete,
Name in block letters
Stand: 08/11/2016
Name in block letters
of load-bearing
fastening elements
All fastenings photographed with number plate

installation plan
is correct (only

Runner was transferred to the owner (only for

Example:
yes no N.R.

capacity present


were used
stored on site

rope system)



Signature
Seite 14 von 16
Signature