SMA Solar Technology BEAM-AW15 Mode D'emploi page 27

SMA Solar Technology AG
PG screw fitting
5. Unscrew the antenna tip and remove the threaded sleeve and the sealing ring from the
antenna cable. The antenna cable and the antenna spring are no longer required.
Install antenna extension cable
You need the parts shown in the figure to install the external antenna.
Antenna extension cable
Rubber ring
The parts of the old antenna in the dotted box (see figure above) are now mounted to the cable of
the external antenna.
6. Remove the rubber from the sealing ring.
Threaded sleeve
Antenna tip
Washer Antenna bracket
Installation of the external Antenna Kit
Sealing ring
Antenna spring
Antenna tip
Threaded sleeve
Sealing ring
Sealing ring
Rubber
BEAMAW-BXX073022 27