Retrofitting For Initial Situation (A) - SMA Solar Technology BEAM-AW15 Mode D'emploi

Installation of the external Antenna Kit

1.1 Retrofitting for initial Situation (A)

This section refers solely to initial situation (A). For the different initial situations, please refer to
section "Installation of the external Antenna Kit" on page 20.
Fasten antenna extension cable
1. Unscrew the antenna tip from the inverter housing. It will
still be required later.
2. Remove the sealing from the thread of the antenna.
3. Screw the antenna extension cable to the
thread of the antenna on the inverter
housing.
22 BEAMAW-BXX073022
SMA Solar Technology AG