SMA Solar Technology BEAM-AW15 Mode D'emploi page 23

SMA Solar Technology AG
Fasten antenna bracket
1. Remove the protective foil from the antenna bracket.
2. Secure the antenna bracket with screws in a suitable position relative to the inverter. See
chapter "External Antenna Kit" on page 32 on the advantages of horizontal or vertical
mounting.
3. Place the washer on the external thread of the antenna cable and insert the external thread
through the slit in the antenna bracket.
4. Screw the antenna tip to the external thread of the antenna cable from the other side of the
antenna bracket.
Avoid major kinking in the antenna cable.
Antenna bracket
Washer
Installation of the external Antenna Kit
Antenna tip
BEAMAW-BXX073022 23