SMA Solar Technology BEAM-AW15 Mode D'emploi page 21

SMA Solar Technology AG
Scope of delivery for external antenna kit
Differences in the initial situation
The installation of an external antenna kit is determined by the initial situation at the inverter.
Initial situation (A)
with unscrewable antenna
• For initial situation (A) please refer to section "Retrofitting for initial Situation (A)" on page 22 .
• For initial situation (B), with the Radio Piggy-Back installed at the factory, please refer to
section "Installation for initial Situation (B)" on page 24
• For initial situation (C) please refer to section "Retrofitting for initial Situation (C)" on page 26.
Antenna extension cable
Rubber ring
Initial situation (B)
equipped with Radio
Piggy-Back by default
Installation of the external Antenna Kit
Antenna bracket
Washer
Initial situation (C)
BEAMAW-BXX073022 21