babymoov Babyphone Slim Notice D'utilisation page 13

Minimum temperature indicator
Maximum temperature
indicator
Channel N° /temperature
in baby's room
Music symbol
Cradle song N°
Turn the transmitter on (1).
Channel setting Press and hold the mode button (3) for
more than 3 seconds; a beep will sound.
Use selection button (2) to chose the
channel and press the mode button (3) to
validate your choice.
Digital code setting
Use selection button (2) to chose the digital
code and press the mode button (3) to
validate your choice.
Power output
setting (see details
below this table)
Use selection button (2) to chose Hi or EL
and press the mode button (3) to validate
your choice.
Transmitter screen
SETTINGS
Transmitter
BABYPHONE SLIM • Instruction manual
Out-of-range symbol
Walkie-talkie mode symbol
Vibration mode symbol
Transmitter battery charge
level indicator
Battery charge
level indicator
Digital code
Loudspeaker volume
indicator
Receiver
Turn the receiver on (11).
or
Press and hold the mode button (13) for
more than 3 seconds; a beep will sound.
Use the selection button (12) to chose the
same channel as on the transmitter, and
press the mode button (13) to validate your
choice.
Use the selection button (12) to chose the
same digital code as on the transmitter,
and press the mode button (13) to validate
your choice.
15