Jaga MICRO CANAL L060 Manuel page 44

11
Fit the final finish and place the inner casing in the outer casing.
13
Anchoring of the inner housing after fine adjustment .
15
Connect the flexibles to the coil's supply and return connections.
44
JAGA N.V. | MICRO CANAL | MANUEL | 26 APRIL 2022, 14:59 | V.02
12
Use the control screws to adjust the unit to the desired height.
Place the device on finished floor height .
14
only for continuity: use the supplied connecting pieces to connect
the different units.
Remove plug at hydraulic connection.
Use a back-off wrench when fastening
the hydronic connections