Setting The Date And Time - Oakley JUDGE II Manuel D'instructions

JUDGE II
®
The precision of ten-jewel Swiss movement is matched with an oscillator circuit that counts each second as
32,768 vibrations of a crystal tuning fork. This true chronograph features a sub dial for measuring elapsed min-
utes and hours, plus a sweeping second hand that accelerates to the current moment when pause is released.
The band is available in natural leather or the highest grade of surgical stainless steel with a filled backing of
unobtainium for the comfort of reduced weight.The instrument also features a large date display, a 48-month
®
endurance battery and the hardest crystal utilized in watchmaking, pure sapphire, with a magnifying window
to optimize the viewing of the sub dial.

SETTING THE DATE AND TIME

For normal use, the crown rests against the case
to maintain a protective seal. The crown can be
pulled out to two click positions for setting the date
and time.
To ensure that the date-change function activates at
midnight (and not at noon), synchronize the timepiece
by doing the following:
TO SET THE DATE AND TIME:
1. Pull the crown out to the first click position (a).
2. Turn the crown clockwise and set the date to
yesterday's date.
3. Pull the crown out to the second click position
(b).
4. Turn the hands forward until today's date appears,
then continue forward until the current time is
reached. If the current time is in the afternoon or
evening, move the hour hand all the way around
the dial to pass 12 o'clock noon.
5. Push the crown back down against the case.
JUDGE II INSTRUCTION MANUAL 01
®
p1
Hour hand
Chrono
minute hand
Chrono second hand
Minute hand
Button A
Crown
POS A POS B
Button B
Chrono hour
hand