Edging - Oregon ST275 Manuel D'instructions Original

OPERATING THE TRIMMER/EDGER

EDGING

CAUTION: TO REDUCE THE RISK
OF INJURY, KEEP THE GUARD
BETWEEN THE OPERATOR AND THE
TRIMMER HEAD.
Edging maintains an existing border
between a lawn and another object such
as a sidewalk, pavement, or flower bed
The trimmer/edger is not designed for
creating a new hard edge, but is useful
for keeping an existing edge clean
Keep hands away from the throttle
trigger, then move the edging guard so
that it extends from the trimmer and
clicks into place
Approach the lawn with the trimmer
turned so that the bottom of the
trimmer head is pointed toward the side
of the lawn and the edging guide is
pointed toward the ground Position the
edge guide along the edge of the lawn
(Fig 19)
FIG. 19
18
OREGON® Cordless Tool System
TRIMMER/EDGER MODEL ST275
In tight spaces, such as against a fence or
other barrier, it is acceptable to reverse
grip on the rear handle and hold the
trimmer/edger in a more vertical position
(Fig 20)
FIG. 20
For extended periods of edging, it is
acceptable to rotate the front handle
(Fig 21) This may provide a more
comfortable grip
FIG. 21
AA 1013 - F/N 564572