BRÖTJE RGT B Instructions De Montage page 39

Fig. 12: Display with active test mode
Gesendete
Datenpakete
136231-02 10.15
C0003174
5. Terminate the connection test by pressing the key on the FE receiver once and
pressing the ESC key on the RGTF/RGTKF room controller three times
Note: The connection test has been successful if at least 50% of the transmitted
data can be received by the room controller.
For detailed information on programming the integrated LMS system controller
and setting tables with the programmable parameters, see the boiler installation
manual.
Room device RGT B/RGTK B and RGTF B/RGTKF B
Commissioning
Empfangene
Datenpakete
GB
39