BRÖTJE RGT B Instructions De Montage page 33

5.3 Installation of the RGTF/
RGTKF without wall
mounting bracket
Fig. 8: Installation of the RGTF/RGTKF room controller
5.4 Connection receiver FEK
(accessory)
Fig. 9: Installing the FEK receiver
136231-02 10.15
The room controller RGTF/RGTKF can also be installed without wall mounting
bracket.
Note: Only for boiler with RVS control unit.
In accordance with Fig. 9 , the FEK receiver is oriented in the control panel of the
boiler with its pushbutton pointing downwards.
LED
C0003147
Note: To improve the signal range, the FEK receiver can also be mounted outside
the boiler. The max. cable length is approx. 1.4 m and must not be extended.
Room device RGT B/RGTK B and RGTF B/RGTKF B
Installation
Taster
GB
33