BRÖTJE RGT B Instructions De Montage page 32

Installation
GB
5.2 RGTF/RGTKF installation
Fig. 7: Installation of the RGTF/RGTKF room controller
32
The following diagram shows the installation of the RGTF/RGTKF room controller.
1. Undo snap hinge closure of lower clamp
2. Remove upper part from lower part
3. Attach wall mounting bracket at the intended location
4. Connect upper and lower part of clamp
5. Open battery compartment, remove isolating strip, close battery compartment
6. Push room controller into the wall mounting bracket
Room device RGT B/RGTK B and RGTF B/RGTKF B 136231-02 10.15