BRÖTJE RGT B Instructions De Montage page 31

5. Installation
5.1 RGT/RGTK installation
Fig. 6: Installation of the RGT/RGTK room controller
136231-02 10.15
The following diagram shows the installation of the RGT/RGTK room controller.
1. Undo snap hinge closure of lower clamp
2. Remove upper part from lower part
3. Attach wall mounting bracket at the intended location
4. Secure connecting cables
5. Connect upper and lower part of clamp
6. Push room controller into the wall mounting bracket
Room device RGT B/RGTK B and RGTF B/RGTKF B
Installation
31
GB