NEC LCD1915X Mode D'emploi page 7

Quick Start
DVI-D Cable Installation (Optional)
1. Make sure both the monitor and computer are powered-OFF.
2. Connect the DVI-D Cable
Connect one end of the monitor's DVI-D cable to the digital DVI-D connector (24-pin
socket) of the computer 5s graphics card. Connect the other end of the monitor's
DVI-D cable to the DVI-D connector (24-pin socket) in the rear of the monitor.
3. Connect Power Cord
Connect the AC adapter's cable to the monitor. Connect one end of the power cord to
the AC inlet of the AC adapter and the other end to a proper AC outlet.
4. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
5. If the monitor still does not function properly, please refer to the troubleshooting
section to diagnose the problem.
LCD1915Xmanual1216.p65
–continued
5
5 12/19/03, 9:47 AM