Salda Stouch Notice Technique page 56

EN
Intensive pre-heater cooling by activation of manual protection
.46
Internal communication error
.47
DX cooler defrosting
.48
Too high relative humidity in extract air during 3 days. Increased air flow
.49
Too high relative humidity in extract air. Increased air flow
.5
Broken rotor belt. The system is off
.5
EKR automation alarms
Indication Meaning (see device technical manual for alarm description)
Fans fault
.
Supply air temperature sensor fault
.
Return water temperature sensor fault
.3
Outdoor temperature sensor fault
.4
Fire protection is activated
.5
Supply air temperature is too low ( < -10'C) (A2)
.6
Overheat of fans. A4 input (A4)
.7
Sensors fault
.8
Return water temperature is critical (A5)
.9
Low power (A7)
.
Overheat (A6)
.
Contaminated filters
.
Supply air temperature is too high (>40'C) (A6)
.3
CUSTOM automation alarms (add after setting of CUSTOM modbus addresses)
Indication Meaning
.
.
.3
.4
.5
.6
.7
.8
.9
.
56
www.salda.lt www.salda.lt