Ormed ARTROMOT-S3 Mode D'emploi page 72

and the shoulder are at the same
level.
c. Now open clamping lever (18) for
adjustment of the upper arm
Å
length , locking screw (20) for
adjustment of the elbow angle
and locking screw (28) for adjust-
ment of the forearm rest inclination
and set the motion element to a
position that is comfortable to the
patient and suitable for the therapy
session. When done, tighten all
screws and levers.
d. Open clamping lever (26), adjust
the forearm length
patient and close the clamping
lever.
3. In the next step, program the eleva-
tion range of motion as follows:
a. Press the MENU key on the
programming unit to access
level 1 (M1).
b. Next set the desired range of
motion for adduction and abduc-
tion by first pressing the parame-
ter key for adduction
set the values with the +/- keys.
c. Set the abduction
the same way.
Note!
Having programmed the ranges of
motion, you can program additional
options, such as pause or speed.
4. Save the settings with the STOP key,
set the carriage to the starting
position with the START key and
initiate therapy by pressing the
START key again.
è
ì
to the
and
value in
72