Personal Safety - Ega Master 58875 Manuel D'instructions

2. Do not remove any labels. Replace any damaged labels immediately.
3. Do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet fuel.
Only use the manufacturer recommended lubricants.
4. Only use proper cleaning solvents to clean parts. Use only cleaning solvents which meet
current safety and health standards. Use cleaning solvents in a well ventilated area.
5. Keep work area clean, uncluttered, ventilated and illuminated.

PERSONAL SAFETY

1. When wearing gloves, always be sure that the gloves will not prevent the throttle mechanism
from being released.
2. Always wear eye protection when operating or performing maintenance on this tool.
3. Always wear hearing protection when operating this tool.
4. Always use Personal Protective Equipment appropriate to the tool used and the material
being worked on. This may include dust mask or other breathing apparatus, safety glasses,
ear plugs, gloves, apron, safety shoes, hard hat and other equipment.
5. Avoid breathing in any exhaust from tool use.
a. Some dust may also be created by working in close proximity to the following chemicals:
i. Lead from lead-based paints
ii. Crystalline silica from bricks and cement and other masonry products
iii. Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as dust masks that are specially designed to filter out
microscopic particles.
6. Keep others at a safe distance from your work area or ensure they use appropriate personal
protective equipment.
7. Be aware of buried, hidden or other hazards in your work environment. Do not contact or
damage cords conduits, pipes, or hoses that may contain electrical wires, explosive gases or
harmful liquids.
8. Keep hands, loose clothing, long hair and jewelry away from the working end of the tool.
9. Power tools can vibrate in use. Vibration, repetitve motions or uncomfortable positions may
be harmful to your hands and arms. Stop using any tool if discomfort, tingling feeling or pain
occurs. Seek medical advice before resuming.
10. Keep your body stance balanced and firm. Do no overreach when operating this tool.
Anticipate and be alert for sudden changes in motion, reaction torques, or forces during start
up and operation.
11. DO NO USE THE TOOL WHEN TIRED OR WHEN UNDER THE INFLUENCE OF
MEDICATION, DRUGS OR ALCOHOL.
12. Never use a damaged or malfunctioning tool or accessory.
13. Do not modify the tools, safety devices or accessories.
14. Do not use this tool for purposes other than those recommended.
19