Miele PTD 901 Notice Originale page 41

Select soaking programme
The soaking programme remains activated until it is deactivated.
Deactivate soaking programme
Wash breaks
Do not switch the warewasher off during wash breaks.
Warewasher without an automatic hood mechanism:
Ø
Close the hood to the bottom detent position to prevent the machine from cooling
down.
Warewashers with an automatic hood mechanism:
Ø
Press the start button on the front cover for 2 seconds.
Instructions for a good wash result
– Rinse the cutlery until it is washed. Do not use any foaming pre-cleaners.
– Do not polish glasses, cutlery and dishes. Germs and bacteria exist even in fresh
multi-purpose cloths.
If the wash result is unsatisfactory, observe the instructions in the detailed operating in-
structions or contact an authorised service technician.
Quick guide PTD 901
| |
12019630; 2021-09
|
4 Operation English
41