Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.3
Additional safety instructions for circular saws
▶ Bring the saw blade into contact with the workpiece only when the circular saw is switched on.
➥ The path of the saw must be free of obstructions above and below the workpiece. Do not saw into
screws, nails or similar objects.
▶ Never work overhead with a circular saw.
▶ Never attempt to brake the saw blade by applying lateral pressure.
▶ Avoid overheating the tips of the saw blade teeth.
▶ When cutting plastic, avoid melting the plastic.
▶ Always use a saw blade that is suitable for the material you are going to saw.
▶ Use only saw blades recommended by Hilti that comply with the EN 847-1 standard.
3
Description
3.1
Product overview
3.2
Overview of the guide rail adapter
Rear retaining lug
A
Front retaining lug
S
*2092359*
1
2
2092359
Single-arm fence
@
Cutting angle setting
;
Spindle lock button
=
Auxiliary grip
%
On/off switch
&
Switch-on interlock release button
(
Grip
)
Electric supply cable
+
Clamping lever for cutting depth adjustment
§
Hex key
/
Small base plate
:
LED illumination
∙
Front clamping lever for the fence
$
Clamping lever for cutting angle adjustment
£
Cutting depth scale
|
Hose connector (vacuum cleaner)
¡
Guard
Q
Pivoting guard operating lever
W
Rear clamping lever for the fence (only with
E
large base plate)
Pivoting guard
R
Arbor
T
Direction-of-rotation arrow
Z
Twin-arm fence
U
0° cutting line indicator
I
45° cutting line indicator
O
Cutting angle scale
P
Large base plate
Ü
Clamping screw
[
Clamping flange
]
Mounting flange
Æ
0° indicator on the base plate
º
1°- 50° indicator on the base plate
~
0° indicator
D
1°- 50° indicator
F
English
17
Publicité
Table des Matières
