Installing The Chimneys; Recirculation Filter Installation - Fagor 60CFP36IX Guide D'utilisation

2/ INSTALLING YOUR APPLIANCE
EN

INSTALLING THE CHIMNEYS

1 Remove the chimneys from the packaging, put the inside
chimney through the angle irons and up to the ceiling, use 4
pcs of mounting screws(4*8mm) to fix the chimney onto the
mounting plate. See picture shown.
2 Put the outside chimney onto the inside chimney and use the
S hook to fix on the angle iron. See picture shown.
NONE-DUCTED RECIRCULATION FILTER INSTALLATION
1 Purchase a non-ducted recirculation filter from your dealer.（The non-duct
recirculation filter is optional, and bought separately
2 Install the filter by rotating it onto the brackets which are on both sides of the motor.
8