Programming Your Telephone - ASCOM Arte 20 Mode D'emploi

Telephoning
Present/absent
This key activates/deactivates the desired functions if you are leaving your office or
returning to it. Ex factory this key is programmed as the call diversion key.
Note You can store another function under this key. See: "Programming the Absence
key".

Programming your telephone

Programming mode on/off
Storing a number in the private directory
You can store up to 10 numbers in the private directory of your telephone.
P
Note A simpler way to store numbers is described on page 2.
Storing numbers under the programmable key
You can store numbers or consecutive functions under the freely-programmable key, so
that you can initiate a complete procedure (for example, operating the door opener) with
a single keystroke.
P
20317509en_bat_a0
Enter the number of your deputy and then press
the Absence key. Pressing the key again deacti-
vates call diversion.
To access the programming mode press the Fox-
P
key until the symbol "P" appears in the display.
This mode allows you to access the functions
described below. Exit the programming mode by
END
pressing the END key.
Press the Foxkey in the programming mode,
enter the desired card number (0...9) and the
telephone number to be stored and press the
Foxkey.
Select the memory of the freely-programmable
key in the programming mode (press once:
memory 1, twice: memory 2), enter the character
sequence required and press the Foxkey.
5