ASCOM Arte 20 Mode D'emploi page 70

Telephoning
Conference
After initiating an enquiry call you wish to set up a conference together with your original
call partner.
Note Don't worry! When you are setting up a conference call none of your call partners
will be disconnected. The connections will only be disconnected if the END key is
pressed or if the handset is replaced!
Call waiting
If during a conversation another caller tries to reach you, you will here a muted tone in
the handset, and the number of the caller will appear on your display (for example, "CH
t 215").
Call back
You request a call back from an internal subscriber whose line is busy or who is not
answering.
Note Only one callback can be activated at a time.
Call back requested
A subscriber tried to reach you; "MESSAGE" and the number of the calling subscriber
appear in the display.
Calling back
Deleting call back
4
3
Press dialling key 3
GHI
If you wish to speak to this person without losing
your current connection, press the Foxkey
(brokering).
If you do not wish to speak to the caller press
the END key
END
Press the Foxkey and replace the receiver.
Press the Foxkey in idle state and lift the handset.
Press the Foxkey twice (double click) in idle state.
2x
20317509en_bat_a0