How To Ride; How To Stop - Razor Power A 2 Mode D'emploi

Trottinette électrique pliable
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
EN

HOW TO RIDE

Do not activate the thumb throttle unless you are on the Power A2 and in a safe, outdoor environment
suitable for riding.
Put kickstand up.
Press the power button (A), the LED will light up.
Get on the scooter and place both hands on the handlebars. Kick to start (B), and then push the thumb
throttle (C).
A

HOW TO STOP

For controlled stops, apply the brake by pressure on the rear-fender brake. Razor recommends that you
practice applying the brake at various speeds and in an open area free from obstructions before riding
your scooter around others.
PowerA2_MAN_24L_CAN_190701_UL.indd 53
C
53
NOTE: Electric scooter must
be moving at least 5 km/h (3
mph) while engaging throttle
to engage motor.
B
NOTE: As an additional safety
feature, the scooter is designed
to cut power to the motor
when brake is applied.
NOTE: Motor will re-engage,
(without having to kick to start),
if brake is released and throttle
is applied before scooter
has slowed down to under
5 km/h (3 mph).
NOTE: Practice riding only in
wide open areas clear from
curbs, parking blocks and
other obstacles. Impacting
the wheels against any hard
surface can damage the
wheels. Wheels are not covered
under the limited warranty.
7/1/19 5:09 PM

Publicité

Table des Matières
loading

Table des Matières