Charging The Battery - Ega Master 58916 Manuel D'instructions

LED light for working in dark place.
Power Switch:
A. In Forward operation, 1/2 trigger will be soft-start. Full trigger for high speed.
B. In Reverse operation is always in high speed.
El indicador LED y el botón de interruptor F / R proporcionan información del proceso para
el operador.
GREEN ..............OK Green, the tightening is OK,and shut-off.
RED....................NO OK Red,handle shock with long beep & vibration.
GREEN-RED.....Reverse Green-Red for reverse operation.
YELLOW............Yellow, Low Battery, change battery.
F/R Rotation Switch Operation:
1. Double-click within 1 sec and does not release for 3 seconds.
2. Long Beep,then Green and Red light flash,the model is transformed suc-
cessfully.
Mode 1 - AUTO: Tool return to Forward automatically after Rev operation.
Mode 2 - MANUAL: Tool needs to be adjusted manually to Forward operation after Rev
operation.
1. Short beep,low battery:
Tool can still finish tightening correctly.
2. Long beep,battery is too low:
Motor is locked,change the battery immedicately .

CHARGING THE BATTERY

1. Place charger in a cool and well-ventilated area.
2. Slide the battery into charger easily and push to the bottom.
F/R Switch for Reverse:
Double-click within 1sec for F/R rotation
LED Indictor for process information
7