Publicité
Step 16
1
Q
D48
Pull the DRAWER FRONT BRACKETS (10G) apart and slide them into the grooves in the DRAWER SIDES (D48
å
and D49). You may need to gently tap them in with a hammer.
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for easy identifi cation.
å
Fasten the DRAWER FRONT (Q) to the DRAWER FRONT BRACKETS (10G). Use four BLACK 9/16" LARGE
å
HEAD SCREWS (1S).
2
D953
U n fi
n i s h
s u r
e d
f a c
e
D48
Q
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D953) into the
å
grooves in the DRAWER SIDES (D48 and D49)
and DRAWER FRONT (Q).
Page 24
Tap down with your
screwdriver and hammer.
D49
3
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the groove.
D49
D48
å
VIEW THE T-SLOT BOX VIDEO
10G
D49
D151
D49
Fasten the DRAWER BACK (D151) to the DRAWER
SIDES (D48 and D49). Use four BLACK 1-9/16" FLAT HEAD
SCREWS (30S). Repeat this step for the other drawer.
424988
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(8 used in this step)
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
www.sauder.com/service
1S
Publicité
