Sauder Granite Trace 424988 Mode D'emploi page 16

Step 12 Step
NOTE: You will need someone's help in this step.
å
Fasten the TOP (E3) to the ENDS (A and B) and
å
UPRIGHTS (C and D). Tighten eight HIDDEN CAMS.
Fasten three METAL BRACKETS (4G) to the TOP
å
MOLDING (R). Use three BLACK 9/16" LARGE
HEAD SCREWS (1S).
NOTE: Be sure the BRACKETS are even with the edges of
å
the MOLDING.
Fasten the TOP MOLDING (R) to the TOP (E3). Use three
å
BLACK 9/16" LARGE HEAD SCREWS (1S) through the
METAL BRACKETS on the MOLDING (R) and into the
holes in the TOP (E3).
A
These holes must be here.
Page 16
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
C
E3
R
Maximum
210 degrees
Minimum
190 degrees
1S
D
424988
Arrow
R
B
www.sauder.com/service
4G