Safety Requirements; General Information - LENCO Alecto HeeHee Mode D'emploi

Read the manual
Always scan the QR code inside the packaging artwork of the product HeeHee to go to the latest
version of this product's user manual. Carefully read this user manual and follow all instructions including
the 'Help' information. If you still can't get out, please contact our customer care service. Always keep this
instruction manual cause it contains important information!

Safety requirements

- Don't attempt to repair or modify any electrical or mechanical functions of this product, this will
declare the warranty as void.
- Replacement of the battery is not possible. Please do not attempt to change these batteries yourself.
Instead, contact our customer support for repair or replacement information or engage a professional to
service or replace the battery.
- Althought the product is waterproof IPX4, please try to keep the product away from any liquids.
- Disposal of the product into fire or a hot oven, or mechanical crush or cutting may damage the included
battery and may result in an explosion.
- Leaving the product with included battery in an extremely high temperature surrounding environment may
result in an explosion or the leakage of flammable liquid or gas.
- Subject the product with included battery to extremely low air pressure may result in an explosion or the
leakage of flammable liquid or gas.
- The battery charger used with the toy should be regularly examined for potential hazard, such as damage
to the cable or cord, plug, enclosure of other parts and that in the event of such damage the toy must not be
used until that damage had been properly removed.
- This toy contains battery that is non-replaceable, only use the supplied USB cable.
- The toy is only to be connected to equipment bearing either of the following symbols

General information

- For safety reasons, there is a sound limitation set on HeeHee. With the connected smartphone you can turn
the sound louder than 70dB. You will then receive a warning.
- Phone calls do not come in via HeeHee.
- Explanation of the colors of the lights
Blue fast blinking = searching for Bluetooth connection
Blue blinking slowly = connected to Bluetooth
Red blinking = low battery
Off = no connection or battery completely empty
- Press and hold HeeHee button for 5 seconds = on/off (once connected, HeeHee remains in phone memory
unless disconnected).
Pressing button HeeHee 3 times in quick succession = disconnect Bluetooth connection between HeeHee
and smartphone immediately.
- Compatible Android versions: 5.0 or higher
- Compatible iOS versions: 10 or higher
- 2 -
or .