Heath Zenith DualBrite SL-4290 Serie Mode D'emploi

D B
ual rite
Sensing Diecast
lantern
SL-4290 Series
Meets the ENERGY STAR
guidelines when D
function is off.
Questions or problems? Before returning
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 7:30 am to 4:30 pm, CST,
Monday – Friday.
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
hours.
Package Contents
• Lantern
• Universal Mounting Bracket
• Mounting Screws (Includes extra long screw
studs for recessed junction box mounting)
• Wire Connectors
requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
• Some electrical codes require installa-
tion by a qualified electrician.
© 2007 HeathCo LLC
®
Motion
UAL
Mode:
test
auto
Manual
accent
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
minutes for the circuitry to calibrate.
Set the ON-TIME switch
®
on the bottom of the cover
B ®
RITE
plate to teSt.
Set ON-TIME switch to
1, 5, or 10 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only
with the ON-TIME switch in
the 1, 5, or 10 position.
Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.
OPeratiON
On-Time Works: Day Night
5 Sec
1, 5, or 10 Min
To Dawn*
3,6 Hr. to Dawn
teSt
teSt 1 5 10 MIN
autO
TEST 1 5 10 MiN
MaNual MODe
x x
x
x
x
1
/
2
ON-TIME
ON-TIME
1 Second
OFF then...
... back on.
598-1277-01